INTRODUCTION

The NEW Internal Bond™ Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously.

APPLICATIONS

Newsprint, Fine Paper, Liner Board, Book Stock, Carton Board, Medium, Coatings, Laminates

FEATURES

• Storage and editing of up to 500 readings
• Selectable units (ft.lb/in², J/m² and kg•cm)
• RS-232 serial output
• Report printout with built-in printer
• Magnetic hammer release and magnetic brake
• Automatic calibration
• Automatic specimen hold-down during test sequence
• Settable limits, statistics-average, standard deviation, high/low results
• Automatic cutting of samples saves you time and keeps you safe
• 5.7 inch LCD color display with 320 x 240 resolution
• 15 Character alphanumeric keypad
• 6 function keys for easy test setup
• 10 soft key icons allow simple intuitive navigation of test functions
• Conforms to TAPPI standard T 569

Sample Prep Station

A precision sample Preparation station with digital display and direct read out in kPa and psi units is available to prepare up to 5 test pieces at the same time. The Sample Prep Station is supplied to provide a consistent adhesive transfer when pressing the test specimen between the double-sided tape and aluminum platens.

Included with the Sample Prep Station are 5 aluminum platens with a sample size of 25.4 x 25.4 mm (1.0 x 1.0 inches). The clamping pressure is adjustable from 345 kPa (50 psi) to 1379 kPa (200 psi). During the pressing operation a selectable dwell time can be set by the operator from 0-4 seconds. The factory setting is 3 seconds in accordance with TAPPI T 569. The system is designed with a reinforced anvil to prevent deflection during sample preparation.

Reinforced anvil system prevents sample deflection during preparation!

Prep Station Specifications

• Pneumatic clamping force: 50-200 psi
• Dwell time: 1 to 4 seconds
• Sample Press Timer: user adjustable 1-4 seconds
• 5 Aluminum platens: sample size of 25.4 x 25.4 mm (1.0 x 1.0 inches)
• Sample thickness range: up to 1.25 mm (0.050 inches)
• Clamping pressure adjustment: 345 kPa (50 psi) to 1379 kPa (200 psi)
• Clamping pressure resolution: 7 Kpa (1 psi)
• Clamping pressure control: at 690 kPa (100psi) is better than ± 21 kPa (7 psi)
  at 1034 kPa (150psi) is better than ± 34 kPa (5 psi)

Prep Stations Size

Software Program

• Screen displa
• Provides a web-like page navigation menu driven user interface.
• Normal Mode
• Calibration mode

INSTRUMENT SPECIFICATIONS

• Ranges: 0 -1050 J/m² (0 - 500 ft.lb x 10-3 ), 0 - 1575J/m² (0 - 750 ft.lb x 10-3 ) and 0 - 2100 J/m² (0 - 1000 ft.lb x 10-3 )
• Pendulum Release: Magnetic
• Peak/Angular Resolution: 0.04°
• Standard: ½ ft.lb/in² pendulum standard, ¾ ft.lb/in² and 1 ft.lb/in² available for stronger materials.
• Options: ¼ ft.lb/in² and other weights also available
• Results directly in: ft.lb/in², J/m², kg.cm
• Statistics: Average, Standard Deviation, Minimum, Maximum and Calibrate function

INSTRUMENT SIZE

CONNECTIONS

Air: Instrument quality 700 kPa

Electrical: 90-264 VAC 50/60 Hz